Seat Cushion - Third Row, 60 Percent: Disassembly
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For parts identification and locations, refer to Seat - Exploded View, Third Row .
- 1.
Remove the seat backrest. For additional information, refer to Seat Backrest - Third Row, 60 Percent .
- 2.
Remove the inboard and outboard slide bracket-to-cushion frame nuts and slide bracket from both sides of the seat cushion.- To install, tighten to 15 Nm (133 lb-in).
- 3.
Remove the 2 seat riser-to-cushion frame bolts and riser.- To install, tighten to 30 Nm (22 lb-ft).
- 5.NOTE: Use care when separating the cushion cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the cushion foam pad.
Separate the hook-and-loop strips and invert the cushion cover to the row of hog rings.