Pinpoint Test P : The Keyless Entry Keypad Illumination Is Inoperative: Notes
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Remote Keyless Entry and Alarm , for schematic and connector information.
Normal Operation and Fault Conditions
Refer to Handles, Locks, Latches and Entry Systems - Without Intelligent Access (IA) .
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B121A:11 | Keypad Illumination Output: Circuit Short To Ground | Sets when the BCM detects a short to ground from the keyless entry keypad illumination output circuit. |
Possible Causes
- Fuse
- Wiring, terminals or connectors
- Keyless entry keypad
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the keyless entry keypad for damage
- Inspect the BCM fuse 18 (10A)