LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test G : The Analog Tachometer Is Inoperative >> Notes

Pinpoint Test G : The Analog Tachometer Is Inoperative: Notes

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions 

See Tachometer. Refer to Instrument Panel Cluster (IPC) .

NOTE: If DTC U0100:00 sets in the IPC, other observable symptoms can be an inoperative speedometer, temperature gauge or odometer.

If the IPC does not receive the engine speed data from the PCM for longer than 5 seconds, the IPC sets DTC U0100:00 in continuous memory and defaults the tachometer to 0 Revolutions Per Minute (RPM).

If the IPC receives invalid engine speed data from the PCM for longer than 5 seconds, the IPC defaults the tachometer to 0 Revolutions Per Minute (RPM).

Possible Sources