LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Information Center - Instrumentation, Message Center, And Warning Chimes) >> Diagnosis And Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> Pinpoint Test BC : The Key-In-Ignition Warning Chime Is Inoperative >> Notes

Pinpoint Test BC : The Key-In-Ignition Warning Chime Is Inoperative: Notes

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Instrument Cluster for schematic and connector information.

Normal Operation and Fault Conditions 

See Key-In-Ignition Warning Chime. Refer to Warning Chimes .

BCM DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
B10F1:14 Key In Switch: Circuit Short To Ground or Open A continuous and on-demand DTC that sets if the BCM detects an open on the key-in-ignition switch input circuit or if the BCM detects ignition START, RUN/START or RUN/ACC inputs without the key-in-ignition input.

Possible Sources 

scientia non olet · About LEMON Manuals