Pinpoint Test A : The IPC Is Inoperative: Notes
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Instrument Cluster for schematic and connector information.
Normal Operation and Fault Conditions
The IPC receives a hot at all times voltage from the BCM. The IPC receives the ignition status message from the BCM over the HS-CAN.
Possible Sources
- Fuse
- Communication concern
- IPC
Visual Inspection and Diagnostic Pre-checks
Inspect the BCM fuse 23 (15A).