Pinpoint Test C : The Power Liftgate Stops In The Secondary Latch Position (Does Not Pull Into Primary Latch Position): Notes
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
Refer to Body Closures .
LTM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B2019 | Liftgate Exceeded Time Allowed to Cinch Door | Sets when the LTM detects the liftgate cinching sequence has been active for more than 5 seconds. |
| B2908 | Latch Switch Invalid | Sets when the LTM detects the liftgate is not in the fully latched (primary) position at the beginning of the self-test. May also set if the LTM does not detect a change in the latch status during latch releasing/cinching. |
Possible Causes
- Liftgate alignment
- Latch striker alignment
- Wiring, terminals or connectors
- Power liftgate latch
- LTM