Safety Belt Retractor and Pretensioner: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: During installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.

1.

To install, reverse the removal procedure.

2.

Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test Component Test .

3.

Repower the SRS. For additional information, refer to Supplemental Restraint System .