Removal And Installation
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Open the glove compartment.
- 2.
NOTE:
Forcing the glove compartment past the stops will damage the dampener.
If equipped, disconnect the dampener.
 Courtesy of FORD MOTOR COMPANY
|
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Remove the 3 glove compartment screws and the glove compartment.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
To install, reverse the removal procedure.