Window Glass - Rear Quarter: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

1.

Apply 8 mm (0.32 in) foam core butyl to the rear quarter window glass frame.
- Start at the bottom middle and work around the frame.

2.

Install the rear quarter window glass.
1. 1.
  
  Position the rear quarter window glass.
1. 2.
  
  Install the rear quarter window glass nuts.
- Tighten to 2 Nm (18 lb-in).

Courtesy of FORD MOTOR COMPANY

3.

If equipped, install the air duct.
- Install the pin-type retainer.

Courtesy of FORD MOTOR COMPANY

4.

Connect the audio antenna.

Courtesy of FORD MOTOR COMPANY

Vehicles with power vent windows

5.

Install the rear quarter window regulator.

Courtesy of FORD MOTOR COMPANY

6.

Install the bolts and rear quarter window regulator motor.
- Tighten to 7 Nm (62 lb-in).
- Connect the electrical connector.

Courtesy of FORD MOTOR COMPANY

All vehicles

7.

Position the headliner and install the coat hooks.

8.

Install the rear quarter trim panel. For additional information, refer to Interior Trim and Ornamentation .