Pinpoint Test K : B11D9:17: Notes
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Power Distribution/BCM , for schematic and connector information.
Normal Operation and Fault Conditions
The SCCM continuously monitors the voltage supply circuit. If voltage increases above a predefined limit, the SCCM ceases functions. DTC B11D9:17 can set if the vehicle has been recently jump started or the vehicle battery has been recently charged.
SCCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B11D9:17 | Vehicle Battery: Circuit Above Threshold | This DTC sets in continuous memory if the SCCM detects battery voltage above 19 volts from the battery voltage supply circuit. |
Possible Causes
- Charging system
- SCCM