LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Steering Column Switches) >> Description And Operation >> Steering Column Switches >> System Operation - Push Button Ignition Switch >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

BCM Network Input Messages 

Broadcast Message Originating Module Message Purpose
Passive entry control code RFA module Provides the passive key information to allow the BCM to change ignition mode out of off.

IPC Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

PAM Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

PCM Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

RCM Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

SCCM Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

ABS Module Network Input Messages (HS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

ACM Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

HVAC Module Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

LTM Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

SOD-L Module Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

SOD-R Module Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.

DSM Network Input Messages (MS-CAN) 

Broadcast Message Originating Module Message Purpose
Ignition status BCM Provides the current ignition mode.