Trailing Arm - Lower: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

NOTE: Do not tighten the bolt at this time.

Install the lower trailing arm and loosely install the new lower trailing arm-to-frame bolt and flagnut.

2.

NOTE: Do not tighten the bolt at this time.

Loosely install the 2 new lower trailing arm-to-wheel knuckle bolts.

3.

Install the wheel and tire. For additional information, refer to Wheels and Tires .

4.

Lower the vehicle so that the weight of the vehicle is resting on the wheel and tires.

5.

Tighten the 2 lower trailing arm-to-wheel knuckle bolts to 103 Nm (76 lb-ft).

6.

Tighten the lower trailing arm-to-frame bolt to 275 Nm (203 lb-ft).