Front Suspension
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
The Rear Wheel Drive (RWD) front suspension consists of the following components:
- Lower ball joints
- Lower control arms
- Ride height sensors (Vehicles with Continuously Controlled Damping (CCD) Suspension)
- Shock absorber and coil spring assemblies
- Stabilizer bar and links
- Upper control arms
- Wheel bearings and wheel hubs
- Wheel knuckles
- Wheel studs
The vehicle is equipped with a front coil spring suspension. This independent-type suspension utilizes a stabilizer bar to aid in vehicle stability. The wheel hub and wheel bearing are sealed units and are serviced as assemblies. The lower ball joints can be serviced independently from the lower arms.
The vehicle has available Continuously Controlled Damping (CCD) Suspension. The system allows the user to customize the ride with Comfort, Normal and Sport modes. Sensors constantly monitor the vehicle's suspension motion, body movement, steering and braking.