Resolving the SHIFT DELAY PULL FORWARD Message
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
If the instrument cluster displays SHIFT DELAY PULL FORWARD perform the following:
- 2.
Press and hold the brake pedal.
- 3.
Put the transmission into position N, and then start the engine.
- 4.
With the engine running, shift the transmission to position D and let the vehicle roll forward, up to 3 feet (1 meter). You may hear an audible noise as the transfer case shifts out of its neutral position. This is normal.
- 5.
Make sure the instrument cluster displays NEUTRAL TOW DISABLED.