Pinpoint Test C : The Power Liftgate Stops In The Secondary Latch Position (Does Not Pull Into Primary Latch Position): Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
Refer to Body Closures .
LTM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B2019 | Liftgate Exceeded Time Allowed to Cinch Door | Sets when the LTM detects the liftgate cinching sequence has been active for more than 5 seconds. |
| B2908 | Latch Switch Invalid | Sets when the LTM detects the liftgate is not in the fully latched (primary) position at the beginning of the self-test. May also set if the LTM does not detect a change in the latch status during latch releasing/cinching. |
Possible Causes
- Liftgate alignment
- Latch striker alignment
- Wiring, terminals or connectors
- Power liftgate latch
- LTM