Pinpoint Test C : B1305:01: Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Remote Keyless Entry and Alarm , for schematic and connector information.
Normal Operation and Fault Conditions
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1305:01 | Hood Switch: General Electrical Failure | Sets when the BCM detects an open from the hood ajar input circuit or when the hood is open during the BCM self-test. |
Possible Causes
- Wiring, terminals or connectors
- Hood latch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the hood latch for damage.