PINPOINT TEST H : U3000:44, 45, 46, 48, 49 Or 4A: Notes

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Normal Operation and Fault Conditions

Refer to Side And Rear Vision .

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Conditions
U3000:44	Control Module: Data Memory Failure	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects an internal RAM memory failure.
U3000:45	Control Module: Program Memory Failure	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects an internal software failure.
U3000:46	Control Module: Calibration/Parameter Memory Failure	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects a failure with the EEPROM.
U3000:48	Control Module: Supervision Software Failure	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects a calibration failure.
U3000:49	Control Module: Internal Electronic Failure	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects an internal electronic communication failure.
U3000:4A	Control Module: Incorrect Component Installed	Sets in continuous memory and on-demand when the SOD-L or SOD-R detects a weak or no sample radar signal.