Fuel Filler Door Cup Bezel: Removal
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The fuel filler door cup bezel is a one-time use only part. Removal of this part will result in damage to the component.
NOTE:
Do not attempt to pry on the bottom of the fuel filler door cup bezel. Failure to follow this direction may result in damage to the vehicle.
- 1.
Using a non-marring body tool, pry outward on the upper RH side of the fuel filler door cup bezel until the clip breaks.
- 2.
Using a non-marring body tool, pry the upper LH side of the fuel filler door cup bezel until the clip breaks.