Transmission Fluid Cooler Hoses: Removal
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- 1.
Remove the front bumper cover. Refer to
Bumpers
.
Vehicles with an auxiliary transmission fluid cooler
- 2.
Release the clamps and remove the transmission fluid cooler-to-transmission auxiliary fluid cooler hose.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Release the clamps and disconnect the transmission fluid cooler hoses from the transmission fluid coolers.
 Courtesy of FORD MOTOR COMPANY
|
Vehicles without an auxiliary transmission fluid cooler
- 4.
Release the clamps and disconnect the hoses from the transmission fluid cooler.
 Courtesy of FORD MOTOR COMPANY
|
All vehicles
- 5.
Remove the pushpins, rotate the 1/4-turn retainers and remove the lower air deflector.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Remove the transmission fluid cooler tubes secondary latches.
 Courtesy of FORD MOTOR COMPANY
|
- 7.
Using the special tool, disconnect the transmission fluid cooler tubes fittings.
 Courtesy of FORD MOTOR COMPANY
|
- 8.
Open the latches, remove the bolt and remove the transmission fluid cooler hoses.
 Courtesy of FORD MOTOR COMPANY
|