Coolant Pump: Removal

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the air cleaner outlet pipe. For additional information, refer to Intake Air Distribution and Filtering .

2.

Loosen the coolant pump pulley bolts.

Courtesy of FORD MOTOR COMPANY

3.

Remove the accessory drive belt. For additional information, refer to Accessory Drive .

4.

NOTE: Cover the A/C compressor belt to prevent coolant contamination of the belt.

Completely cover the A/C compressor belt with waterproof plastic.

5.

Remove the thermostat housing. For additional information, refer to Thermostat Housing .

6.

Remove the bolts and the coolant pump pulley.

Courtesy of FORD MOTOR COMPANY

7.

Remove the bolts and the coolant pump.

Courtesy of FORD MOTOR COMPANY

8.

Remove and discard the coolant pump gasket and O-ring seal.

Courtesy of FORD MOTOR COMPANY