Coolant Crossover Manifold Assembly: Removal

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding .

2.

Remove the Intake Manifold. For additional information, refer to Engine 3.5L GTDI .

3.

Release the clamp and disconnect the heater hose from the coolant crossover manifold assembly.

Courtesy of FORD MOTOR COMPANY

4.

Remove the 3 bolts and the coolant crossover manifold assembly.

Courtesy of FORD MOTOR COMPANY

5.

Remove and discard the gaskets.

Courtesy of FORD MOTOR COMPANY