Wiper Motor - Rear Window: Removal

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear .

2.

Remove the dust boot cover.

Courtesy of FORD MOTOR COMPANY

3.

Remove the nut and the rear window glass handle.

Courtesy of FORD MOTOR COMPANY

4.

Open the liftgate glass.

5.

Remove the nuts and the rear window striker and wiper pivot shaft assembly.

Courtesy of FORD MOTOR COMPANY

6.

Remove the liftgate trim panel. For additional information, refer to Interior Trim and Ornamentation .

7.

Close the liftgate.

8.

If installing a new rear wiper motor, remove the liftgate window glass latch.
1. 1.
  
  Disconnect the electrical connector.
1. 2.
  
  Remove the bolts.

Courtesy of FORD MOTOR COMPANY

9.

Remove the rear window wiper motor.
1. 1.
  
  Disconnect the electrical connector.
1. 2.
  
  Remove the bolts.

Courtesy of FORD MOTOR COMPANY