LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Steering Column Switches) >> Removal And Installation >> Ignition Switch

Ignition Switch

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .

  1. 1.

    Remove the steering column shrouds. Refer to Steering Column .

  1. 2.

    Disconnect the ignition switch electrical connector.
GFD134957Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the ignition switch.

    1. 1.

      Push in the ignition switch tabs.

    1. 2.

      Remove the ignition switch.
GFD134958Courtesy of FORD MOTOR COMPANY

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals