Pinpoint Test Ab : The Stability-Traction Control Indicator (Sliding Car Icon) Is Never Or Always On: Notes
WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
See Stability-Traction Control Indicator (Sliding Car Icon). Refer to Instrument Panel Cluster (IPC) .
If the stability-traction control indicator message is invalid for less than 5 seconds or if the IPC does not receive the stability-traction control message for less than 5 seconds, the IPC defaults the stability-traction control indicator (sliding car icon) to the last indication mode (on/off) based upon the last message received.
If the stability-traction control indicator message is missing for 5 seconds or longer, the IPC sets DTC U0121:00 in continuous memory and defaults the stability-traction control indicator (sliding car icon) on.
Possible Sources
- Communication concern
- Stability-traction control concern
- ABS module
- IPC