Pinpoint Test B : Outer Edge/Shoulder Wear

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

B1 MEASURE THE TREAD DEPTH

Using a tread depth gauge or similar tool, measure the outside edge/shoulder tread depth.

Is the tread depth greater than 2/32 inch?

Yes	ROTATE the wheel and tire assemblies.CHECK and ADJUST the toe to nominal -0.15 degrees (toe out). CHECK and ADJUST caster and camber to nominal. REFER to Suspension System General Information .
No	INSTALL a new tire(s). CHECK and ADJUST the toe to nominal. CHECK and ADJUST caster and camber to nominal. REFER to Suspension System General Information .