P2019 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 2)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2017 Lincoln Navigator, 2017 Lincoln MKZ, 2017 Lincoln MKX, 2017 Lincoln MKT, and 2017 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P2019 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT (BANK 2)
| Description: | This DTC sets when the IMRC2 circuit voltage is greater than or less than a calibrated range. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IMRC2 sensor value should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HU . | ||