P0098 - Intake Air Temperature Sensor 2 Circuit High (Bank 1)
WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2017 Lincoln Navigator, 2017 Lincoln MKZ, 2017 Lincoln MKX, 2017 Lincoln MKT, and 2017 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
P0098 - INTAKE AIR TEMPERATURE SENSOR 2 CIRCUIT HIGH (BANK 1)
| Description: | This DTC sets when the intake air temperature 2 (IAT2) sensor signal is greater than the self-test maximum. The IAT2 sensor maximum is 4.6 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IAT2 sensor PID value. A typical IAT2 sensor temperature should be greater than the IAT sensor temperature. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DN . | ||