LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1626 (Rear Drive Axle Differential - Vehicles With: Ford 9.75 Inch Ring Gear) >> Removal And Installation >> Rear Halfshaft Seal >> Removal

Rear Halfshaft Seal: Removal

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: The stub shaft seals must be replaced whenever the halfshafts are removed.
  1. Remove the rear halfshafts. Refer to: Rear Halfshaft .
  2. NOTE: If removing the stub shaft pilot bearing oil seal only, engage the tangs of the Bearing Remover on the stub shaft pilot bearing oil seal only.

    Remove the rear halfshaft seal.

GFD271788Courtesy of FORD MOTOR COMPANY