Pinpoint Test C : B1251:00
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- C1 TRAIN THE TPMS (TIRE PRESSURE MONITORING SYSTEM) SENSORS TO DETERMINE THE INOPERATIVE SENSOR
- Train all 4 tire pressure sensors. REFER to: Tire Pressure Monitoring System (TPMS) Sensor Location Calibration .
Did all of the TPMS sensors train and did the horn sound when each sensor was trained?
Yes The system is operating correctly at this time. No Before installing a new sensor(s): If a sensor does not respond, MOVE the vehicle to rotate the wheels at least one-fourth of a turn and ATTEMPT to activate the same sensor again. If the sensor still does not respond, ATTEMPT to activate the same sensor again. If the sensor still fails to train, ATTEMPT to train the sensor with the vehicle doors open. If the sensor(s) fails to train a second time, VERIFY the correct sensors are installed. REFER to: WHEELS AND TIRES . If the correct sensors are installed and do not train, INSTALL a new TPMS sensor(s). REFER to: Tire Pressure Monitoring System (TPMS) Sensor .