Interior Door Handle: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
LHF shown, all others similar.
- Release the clips and remove the interior door handle screw cover.
- Remove the interior door handle.
- Remove the interior door handle retainer.
- Release the interior door handle retaining tabs and remove the interior door handle.
- If equipped, disconnect the door lock control switch electrical connector.
- Disconnect the latch control cable and remove the interior door handle.
-
NOTE: This step is only necessary when installing a new component.
If equipped, remove the door lock control switch.
- Release the tabs on the door lock control switch.
- Remove the door lock control switch.