Pinpoint Test J : The Door Locks Operate Only One Way: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Power Door Locks for schematic and connector information.
Normal Operations and Fault Conditions
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B1C37:11 | Master Lock Switch: Circuit Short To Ground | A continuous DTC that sets when the BCM detects a short to ground from the lock request input circuit |
| B1C37:23 | Master Lock Switch: Signal Stuck Low | An on-demand DTC that sets when the BCM detects a short to ground from the lock request input circuit |
| B1C38:11 | Master Unlock Switch: Circuit Short To Ground | A continuous DTC that sets when the BCM detects a short to ground from the unlock request input circuit. |
| B1C38:23 | Master Unlock Switch: Signal Stuck Low | An on-demand DTC that sets when the BCM detects a short to ground from the unlock request input circuit. |
Possible Source
- Wiring, terminals or connectors
- Door lock control switch
- BCM
Visual Inspection and Diagnostic Pre-checks
- Inspect the door lock control switches for damage