Pinpoint Test Aa : U0155:00: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The DDM and PDM receive the odometer value from the IPC over the MS-CAN. There are no noticeable symptoms if either door module does not receive the odometer data.
DDM/ PDM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub-Type Information | Sets when the DDM or PDM detects data messages missing from the IPC. |
Possible Causes
- Network communication concern
- PDM
- DDM
- IPC