Rear Door Alignment
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Adjustment
NOTE:
Removal steps in this procedure may contain installation details.
All alignments
-
WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION (EXCEPT ELECTRIC) . Failure to follow this instruction may result in serious personal injury.
- Remove the door latch striker.
Front door fore, aft and tilt alignment
- Refer to: B-Pillar Trim Panel .
- Loosen but do not remove the door hinge-to-body bolts enough to allow door alignment.
Torque
: 26 lb.ft (35 Nm)
- Adjust the door to specification. Refer to: Body and Frame
.
Front door in and out, up and down alignment
- Loosen but do not remove the door hinge-to-door bolts enough to allow door alignment.
Torque
: 35 lb.ft (47 Nm)
- Adjust the door to specification. Refer to: Body and Frame
.
Torque
: 35 lb.ft (47 Nm)
All alignments
- Install the door latch striker.
Torque
: 41 lb.ft (55 Nm)