LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1586 (Lane Keeping System (Except Electric)) >> Description And Operation >> Lane Keeping System - System Operation and Component Description >> Component Description >> IPMA Camera Heated Windshield Element

IPMA Camera Heated Windshield Element

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

The IPMA camera heated windshield element is a resistive-type heater grid that is integrated into the windshield and located directly in front of the IPMA camera. The IPMA camera heated windshield element cannot be replaced separately from the windshield.

The IPMA camera heated windshield element uses a jumper harness between the component and the vehicle harness. Before replacing the windshield, the BCM or the IPMA for a IPMA camera heated windshield element concern, verify the integrity of the wiring, connectors and terminals on the jumper harness.

scientia non olet · About LEMON Manuals