LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1583 (Passive Anti-Theft System (Pats) - Vehicles With: Keyless Entry And Push Button Start (Except Electric)) >> General Procedures >> Key Programming Using Diagnostic Equipment

Key Programming Using Diagnostic Equipment

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Programming 

  1. NOTE: To enter the PATS security access if no programmed passive keys are available, start a vehicle session using a tear tag or PCM part number. The PATS security access can still be granted even with the ignition off.

    Refer to: Diagnostic Methods .

  2. From the diagnostic scan tool, enter TOOLBOX. Select Body>Security>PATS Functions and follow the on-screen instructions to enter PATS security access.
    • NOTE: A maximum of 8 keys can be programmed into the vehicle.

      From the diagnostic scan tool menu, select the appropriate key programming procedure and follow the on-screen instructions to program the passive key(s).

    • NOTE: When prompted by the scan tool, place the passive key in the backup starting location.

GFD269842Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals