LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1581 (Perimeter Anti-Theft Alarm (Except Electric)) >> Diagnosis And Testing >> Perimeter Anti-Theft Alarm >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Symptom Chart: Anti-Theft - Perimeter 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Symptom Chart 

Condition Possible Sources Actions
The alarm system does not activate from an unauthorized entry at the hood Refer to Pinpoint Test GO to Pinpoint Test A 
The alarm system does not activate from an unauthorized entry at a door Refer to Pinpoint Test DIAGNOSE the courtesy lamps not illuminating when a door is open. REFER to: INTERIOR LIGHTING
The alarm system does not activate from an unauthorized entry at the liftgate/luggage compartment lid Refer to Pinpoint Test DIAGNOSE the incorrect liftgate/luggage compartment lid ajar indication. REFER to: Instrumentation, Message Center and Warning Chimes .
The audible vehicle lock confirmation/panic alarm feature is inoperative Key-in-ignition warning system concern Door lock system concern
Refer to Pinpoint Test
DIAGNOSE an individual button/feature is inoperative from the RKE transmitter. REFER to: Locks, Latches and Entry Systems - Vehicles With: One-Touch Open Driver Window . REFER to: LOCKS, LATCHES AND ENTRY SYSTEMS - VEHICLES WITH: ONE-TOUCH OPEN AND CLOSE FRONT WINDOWS
The alarm system does not arm/no turn signal flash confirmation Refer to Pinpoint Test GO to Pinpoint Test B 
No horn output during alarm activation Refer to Pinpoint Test DIAGNOSE the inoperative horn. REFER to: Horn - System Operation and Component Description .
False alarm activation Door ajar input
Hood switch input
Liftgate/luggage compartment lid ajar input
A valid PATS key read was NOT received when the ignition was transitioned to RUN
An intermittent fault exists. MONITOR the BCM alarm event Parameter Identifications (PIDs) to identify and isolate the cause of the last alarm activation.
Most Recent Alarm Trigger Event (ALARM_1)
2nd Most Recent Alarm Trigger Event (ALARM_2)
3rd Most Recent Alarm Trigger Event (ALARM_3)
4th Most Recent Alarm Trigger Event (ALARM_4