LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1579 (Module Communications Network (Except Electric)) >> Diagnosis And Testing >> Communications Network >> DTC Chart >> DTC Chart - BCM

DTC Chart - BCM

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description Action
U0001:88 High Speed CAN Communication Bus: Bus Off A HS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the scan tool. CLEAR the DTC. REPEAT the network test with the scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0010:88 Medium Speed CAN Communication Bus: Bus Off A MS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the scan tool. CLEAR the DTC. REPEAT the network test with the scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0037:88 Vehicle Communication Bus B: Bus Off The module could not communicate with the network at a point in time. The fault is not currently present since the module had to communicate with the scan tool to report the DTC. VERIFY integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information. If a communication concern is still present, GO to Pinpoint Test AC