Stoplamp Switch: Removal

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

NOTE: Removal steps in this procedure may contain installation details.

- Disconnect the stoplamp switch electrical connector.
- Rotate the stoplamp switch clockwise and remove the stoplamp switch.

Courtesy of FORD MOTOR COMPANY