LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (Exterior Lighting (Except Electric)) >> Removal And Installation >> Stoplamp Switch >> Installation

Stoplamp Switch: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Using a diagnostic scan tool monitor the BOO_ABS PID to confirm the brake switch function. The state should change from OFF to ON when the brake pedal is depressed.
scientia non olet · About LEMON Manuals