High Mounted Stoplamp - 4-Door: Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION (EXCEPT ELECTRIC)
. Failure to follow this instruction may result in serious personal injury.
NOTE:
Removal steps in this procedure may contain installation details.
- Remove the push pins and the decklid interior trim panel.
- Remove the high mounted stop lamp.
- Disconnect the high mounted stoplamp electrical connector.
- Release the tabs.