Front Fog Lamp Adjustment - RS
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING
Special Tool(s) / General Equipment
| Headlamp Beam Setter |
|---|
Adjustment
-
-
NOTE: Make sure that the tire pressures are to specification and that the vehicle is unladen, maximum amount of petrol is 5 litre.
- Alternative the adjustment can be carried out at prescribed tire pressure, a completely filled fuel tank and one person or 75kg on the driver seat.
-
-
- Place the vehicle on a level surface.
- Ensure that the adjustment is made with the suspension set up.
-
NOTE: Always follow the manufacturer's instructions when handling the equipment.
Switch on the front fog lamps.
- Set the measuring screen of the beam setting equipment to the correct front fog lamp adjustment setting. Use the General Equipment: Headlamp Beam Setter
- Adjust the front fog lamps so that the cut-off line touches the horizontal line.