Battery Condition Test
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Battery condition is determined by measuring battery terminal voltage after a specific discharge current is applied for a specified time period.
Visual Inspection and Diagnostic Pre-checks
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
- Inspect wiring, terminals and connectors.
- Inspect the battery.
- Inspect battery mounting.
- Inspect high current BJB connections.
- Use Ford approved battery test equipment.
- Midtronics MDX-650 or P-300/P-600/490/1050
- Midtronics GRX-3590 or 3000