Pinpoint Test P : The BLIS (Blind Spot Information System) Off Indicator Is Never Or Always On: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
See BLIS Off indicator. REFER to: INSTRUMENT PANEL CLUSTER (IPC) - SYSTEM OPERATION AND COMPONENT DESCRIPTION
If the BLIS on message is missing or invalid for less than 5 seconds, the IPC defaults the Blind Spot Information System (BLIS) off indicator to the last state (on or off), based upon the last message received.
If the BLIS on message is missing or invalid for 5 seconds or longer, the IPC defaults the Blind Spot Information System (BLIS) off indicator off.
Possible Sources
- Communication concern
- SODL concern
- SODR concern
- BCM concern
- IPC