Pinpoint Test A : The IPC (Instrument Panel Cluster) Is Inoperative: Notes
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Normal Operation and Fault Conditions
The IPC receives a hot at all times voltage from the BCM. The IPC receives the ignition status message from the BCM over the HS-CAN.
Possible Sources
- Fuse
- Wiring, terminals or connectors
- IPC
Visual Inspection and Diagnostic Pre-checks
Inspect the BCM fuse 69 (5A).