DTC Chart: ICM
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
DTC Chart -ICM
| DTC | Description | Action |
|---|---|---|
| P0195:00 | Engine Oil Temperature Sensor "A" Circuit: No Sub Type Information | GO to Pinpoint Test C |
| P0520:00 | Engine Oil Pressure Sensor/Switch "A" Circuit: No Sub Type Information | GO to Pinpoint Test C |
| P1248:00 | Turbocharger Boost Pressure Not Detected: No Sub Type Information | GO to Pinpoint Test C |
| U0100:87 | Lost Communication With ECM/PCM "A": Missing Message | GO to Pinpoint Test BE |
| U0140:87 | Lost Communication With Body Control Module: Missing Message | GO to Pinpoint Test BK |
| U3000:45 | Control Module: Program Memory Failure | CLEAR the DTC. REPEAT the self-test. If DTC U3000:45 returns, INSTALL a new ICM. REFER to: Information Center Module (ICM) . |
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | GO to Pinpoint Test BW |
| U3006:17 | Control Module Input Power "A": Circuit Voltage Above Threshold | GO to Pinpoint Test BY |