LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (Instrumentation, Message Center And Warning Chimes (Except Electric) (1 Of2)) >> Description And Operation >> Warning Chimes - System Operation and Component Description >> Network Message Chart

Network Message Chart

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Module Network Input Messages - Instrument Panel Cluster (IPC) 

Broadcast Message Originating Module Message Purpose
Alarm/key programming chime request BCM Input used for the keyless key programming chime.
Alarm mode BCM Input used for the perimeter alarm chime.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
Lane keeping system hands off display BCM Input used for the lane keeping alert warning chime.
Parking brake warning request BCM Input used for the parking brake warning chime.
Parking aid active Parking Aid Module (PAM) Input used for the parking aid chime.
Passenger detect status OCSM Input used for the Belt-Minder® chime.
Passive key status BCM Input used for the key left in vehicle chime.
Passive key out of vehicle BCM Input used for the passive key not inside of the vehicle chime.
Position light indication BCM Input used for the headlamps on chime.
Power mode BCM Input used for the key-in-ignition warning chime.
Safety belt status RCM Input used for the safety belt component of the Belt-Minder® chime.
Turn indicator command BCM Input used for the turn signals on chime tone (tick-tock).
Vehicle speed ABS module Input used for the vehicle speed component of the Belt-Minder® chime, the passive key out of the vehicle chime and the door ajar chime.
scientia non olet · About LEMON Manuals