Air Conditioning (A/C) Pressure Transducer - 1.0L EcoBoost (92kW/125PS): Removal
WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
During the removal of components, cap, tape or otherwise appropriately protect all openings to prevent the ingress of dirt or other contamination. Remove protective materials prior to installation.
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the electrical connector and remove the A/C pressure transducer.
- Make sure to cover any open ports to prevent debris from entering the system.