LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1561 (Climate Control System - General Information (Except Electric) (2 Of 2)) >> Removal And Installation >> Air Conditioning (A/C) Clutch and Air Conditioning (A/C) Clutch Field Coil >> Installation

Air Conditioning (A/C) Clutch and Air Conditioning (A/C) Clutch Field Coil: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: A new A/C compressor may come equipped with a clutch and pulley. If not, the A/C clutch components should be reused unless obvious signs of damage are found. If excessive grooving is found on the friction surface, a new A/C clutch disc and hub and a new A/C compressor pulley must be installed together. Otherwise, each component can be installed individually where needed. Install the A/C compressor pulley snap ring with the bevel side out.
    NOTE: Install the A/C compressor pulley snap ring with the bevel side out.

    To install, reverse the removal procedure.

  2. Add or remove spacers between the clutch plate hub and the compressor shaft until the clearance is within specification. Refer to: Air Conditioning (A/C) Clutch Air Gap Adjustment  .
scientia non olet · About LEMON Manuals