LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2018 >> MKZ Select, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1545 (Four-Wheel Drive Systems (Except Electric)) >> Removal And Installation >> All-Wheel Drive (AWD) Module >> Installation

All-Wheel Drive (AWD) Module: Installation

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Check the RDU fluid level. Refer to: Differential Fluid Level Check .
  3. NOTE: If replacing the axle assembly, the 4X4 control module will need to be reconfigured with the new Active Torque Coupling (ATC) bar code information. If the new bar code information does not match the existing 4X4 control module information, driveline damage or driveability concerns can occur.

    If installing a new RDU, re-configure the Active Torque Coupling (ATC). Refer to: Active Torque Coupling Configuration  .

scientia non olet · About LEMON Manuals