Transmission Fluid Level Check

WARNING: This page is about a different car, the 2018 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

For information on Ford Color Coded Illustrations refer to OEM COLOR CODING

Materials

Name	Specification
Motorcraft® Dual Clutch Transmission Fluid XT-11-QDC	WSS-M2C200-D2

Check

Refer to: Health and Safety Precautions in GENERAL INFORMATION (EXCEPT ELECTRIC)
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
If equipped. Remove the underbody shield.
1. Remove the air deflector.
2. Remove the underbody shield.
Courtesy of FORD MOTOR COMPANY
WARNING: Be prepared to collect escaping fluid.

Remove the fill plug.

Courtesy of FORD MOTOR COMPANY
Add or remove transmission fluid as necessary.
Material

: Motorcraft® Dual Clutch Transmission Fluid / XT-11-QDC (WSS-M2C200-D2)

Courtesy of FORD MOTOR COMPANY
Install the fill plug.
Torque

: 26 lb.ft (35 Nm)

Courtesy of FORD MOTOR COMPANY
If equipped. Install the underbody shield.
1. Install the underbody shield.
2. Install the air deflector.
Courtesy of FORD MOTOR COMPANY
Lower the Vehicle.